Corny Keg Rinser | Ball Lock Quick Disconnect (QD) itemID-18357 meaning that you do not

meaning that you do not want to blow out the last little bit in the tip after the sample drains out or you will deliver more than your measured amount

Can also be used as a mash tun with one of our AG405 domed false bottoms (This would require the purchase of a H616 barb along with tubing to connect the false bottom to the coupler)

Stainless Steel (Front and Rear Housing)

along with FPT on the inside for connection of any brewing accessory you might want

Corny Keg Rinser | Ball Lock Quick Disconnect (QD) itemID-18357 meaning that you do notThis simple, yet effective ball lock cleaning system allows you to clean your ball lock kegs thoroughly without disassembling them. It is as easy as connecting each ball lock fitting and screwing the garden hose thread to a hose or faucet. Flip the keg over to drain while pushing water through the dip tubes. It is recommended you clean your kegs immediatley after emptying, as old beer can harden and become difficult to remove over time. PBW or