PIR Motion Sensor (JST) New Class 1 Division 1 and

Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent visible light/UV light combo

The cord on this unit is terminated with an industrial twist lock plug that must remain outside the hazardous location

This flashlight is impact resistant from heights up to 1 meter and vibration resistant so that if a drop does occur the light is unlikely to withstand any damage

20 feet of line power SO cord connects to a fused ON/OFF disconnect switch which controls power to the 15 KVA

PIR Motion Sensor (JST) New Class 1 Division 1 andThis is a simple to use motion sensor. Power it up and wait 1 2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3. 3V. Sensor uses 1. 6mA@3. 3V. The alarm pin is an [open collector](http: en. wikipedia. org wiki