bear paw fishing lures CHSS Snelled Circle Hook, 12-Inch Monofilament, Size 3/0 Hooks, Pack of 6 : Hooks : Sports & Outdoors The short monofilament leader is strung with brilliant fluorescent red beads and a high Bear Paw Tackle Flicker Snelled

Building a DIY Fishing Rod Holder with Storage Supplies List Tools and Accessories Table saw (or circular saw) Drill Forstner, wood-boring bits, or a hole saw in 2 and 1.5 diameter Kreg Jig or other pocket hole system Eye protection Ear protection Dust mask Shopping List Materials 2) Edge Glued Panel project boards 3/4 x 12 x 36 (or 3/4 plywood cut to size) 1) Edge Glued Panel project board 3/4 x 16 x 48 (either cut in half to two 24 lengths or 3/4 plywood cut into two 16 x 24 sheets) 1) 12 or 13 for the braces (the wider it is, the more stability) 2) TROFAST 4 deep storage boxes 1) TROFAST set of 2 shelves 4) 2 Castors (optional, but recommended) Small box of 1.25 pocket hole screws Wood glue Stain (or paint) in preferred color Step 1: Make Your Cuts To build the frame of this DIY fishing rod holder, you need two 16 x 24 panels for the top and bottom, and two 12 x 36 panels for the sides

This is a great way to stay organized and have plenty of lures out there with you

Essentially, its a last hurrah before you have to pull your boat for the winter and have some pleasant memories to carry you though the holiday season and cold winter months until the dawn of the 2021 season

And the curtains are made of 160g polyester fabric, good wrinkle resistance, not easy to deform